In partnership with TGHE
Heat Pump Installation in Bromley,
South East London & North Kent
Heat Geek accredited heat pump installers helping local homeowners switch to efficient low carbon heating.
Bromley Energy working with the UK's most trusted heating & cooling brands
Vaillant heat pump installers for South East London & North Kent
HEAT PUMP INSTALLERS IN SOUTH EAST LONDON
Heat Pump Installation in South East London & North Kent
Looking to switch to a greener, more efficient way of heating your home? At Bromley Energy, we design and install air source heat pump systems for homeowners across Bromley, North Kent and South East London.
We mainly install Vaillant aroTHERM plus heat pumps, trusted for their efficiency, quiet operation and low carbon performance. Every system is designed around your home, your heat loss, your hot water needs and your existing heating setup.
As Heat Geek accredited installers, we focus on doing the job properly. That means clear advice, careful design, quality workmanship and support long after the installation is complete.
Whether you are planning a full heat pump installation, checking if your existing radiators can work with an ASHP, or simply exploring your options, Bromley Energy can help you make the right decision.
Existing radiators retained | Open loop system | Measured SCOP 3.7
Heat Pump Installation
Essex Vaillant aroTHERM Plus Heat Pump Retrofit
This Bromley Energy heat pump retrofit shows that, with the right design, existing radiators can work efficiently with an air source heat pump.
For this Essex project, Bromley Energy installed a Vaillant aroTHERM plus 7kW heat pump while retaining the existing radiators and underfloor heating. Instead of adding unnecessary buffers or hydraulic separation, the system was redesigned as a single open loop circuit, helping to keep the installation simpler and more efficient.
The system is monitored with real-world performance data and has achieved a measured SCOP of 3.7. It is a strong example of how careful heat loss calculations, pipe sizing, weather compensation and commissioning can make a major difference to heat pump performance.
Bromley's most reviewed Energy company are also
Bromley Energy - Heat Geek Elite Energy Super Heroes
As Heat Geek Accredited Installers, we commit to continuous training to stay ahead of the latest heating technologies, system designs, and installation best practices.
Choosing a Heat Geek accredited installer means your home is in expert hands. The training is incredibly in-depth and goes far beyond standard qualifications, giving you the peace of mind that your heating system will be designed and installed to the very highest standards.
Our Heat Pump Range
Vaillant AroTherm
Heat Pump
A low carbon heating and hot water solution. Future-proof thanks to the most cutting-edge heat pump technology with natural refrigerant.
Available in the following outputs: 3.5kw, 5kW, 7kW, 10kW and 12kW.
Ideal for retro-fit and new building.
£POA – starting from
WB Compress 5800i
Heat Pump
A highly efficient low carbon heating and hot water solution. Designed with advanced R290 refrigerant technology for quiet, powerful, and sustainable performance.
Available in the following outputs: 4kW, 5kW, 7kW, 10kW and 12kW.
Perfect for both retrofit installations and new build properties. High flow temperatures up to 75°C. Compact, quiet, and installer-friendly design. Eligible for the Boiler Upgrade Scheme Grant.
£POA – starting from
Trusted across Bromley, North Kent & South East London – Over 136 locals rate us five stars for boiler servicing & installation
Read what other locals say about their Bromley journey
A heat pump range for every South East London home
Our Customer Promise
Trust. It matters more than ever, doesn’t it?
It’s a word that gets used a lot, but for us, trust is something we earn through actions, not slogans.
From the first property survey to the final system handover, we make sure every part of your heat pump journey is handled with care, clarity, and respect. That means giving honest advice, quoting transparently, showing up on time, and completing the job to the highest standard.
At Bromley Energy, trust is built into everything we do. It’s why homeowners across Bromley, Kent, and South East London choose us for their heat pump installations. We’ve spent years developing the knowledge and professionalism needed to deliver low-carbon heating systems that work brilliantly and last.
We’re proud to be your trusted local installer and we’re glad you’re considering us for your next heat pump project.
But don’t just take our word for it.
See what others have to say. Visit our reviews archive to read real feedback from customers across the Bromley and Kent region who’ve experienced the Bromley Energy difference.
Bromley Energy case studies
Our Recent Heat Pump Installation Projects
Controlling your heat Pump
Controlling your home comfort
Heating controls and building regulations have evolved so much in the last 30 years. At Bromley Energy, we believe in delivering maximum energy efficiency while ensuring that the heating system is simple for all uses. We have a range of control options for geeky tech lovers, the average family of four and even for your elderly parents. We will discuss which heating controls are the most suitable whilst on the boiler survey.
Warming Bromley homes since 2007
Bromley's most reviewed boiler company
Heat Pumps vs Boilers
When it comes to heating your home, the two most popular systems today are boilers and heat pumps. Both are designed to keep you warm but they work in very different ways.
If designed and installed correctly, a heat pump is the more eco-friendly option. It runs on electricity and extracts heat from the air (or ground), bringing it indoors to warm your home. Because it moves heat rather than generating it by burning fuel, it’s far more energy-efficient and environmentally friendly.
A boiler, by contrast, burns fossil fuels to heat water, which is then circulated through your home’s radiators or underfloor heating. While boilers have been a reliable heating option for decades, they do have a higher environmental impact compared to modern heat pump systems.
So which is the better choice? It depends on your home, your priorities, and how the system is designed. For an eco-friendly, energy-efficient solution a heat pump is often ideal. For older or less insulated properties or those with higher heat demand, a boiler may still be the better fit.
At Bromley Energy, we’re here to help you make the right choice. With our in-depth knowledge and Heat Geek accredited expertise, we’ll design the best system for your home so you can enjoy reliable, efficient heating all year round.
How it works
Roadmap to Your Heat Pump Installation
Tell us a bit about your home and we’ll give you a free estimate in less than 2 minutes
One of our experts will visit to measure your homes heat loss and check what’s needed to for maximum efficiency.
We’ll send you a clear, no-jargon quote so you know exactly what to expect.
Our friendly team will install your new heat pump with care and attention.
If you prefer to wait for the team to get back to the office just fill in the form below and we will get back to you on the next working day.
Get in touch
Bromley Energy trading style of Thames Gas Heating Electrical
Office Phone : 020 3794 0149 Monday - Friday 09:30 - 15:00
Please use the form or existing customers can respond to our previous email
Thames Gas Heating Electrical Ltd - New Boilers & Air Conditioning Installation Bromley Ln, Chislehurst BR7 6LH
Follow our social networks
FAQ
Heat Pump Installation FAQs
Common questions about ASHP installation, air source heat pumps, grants, surveys and existing radiators for homes in Bromley, North Kent and South East London.
Yes. Bromley Energy installs air source heat pumps across Bromley, North Kent and South East London. We design each ASHP system around your home, heat loss, hot water needs, radiators, insulation and comfort requirements.
ASHP stands for air source heat pump. It uses energy from the outside air to heat your home and hot water. Even when it feels cold outside, an air source heat pump can still collect heat and move it into your heating system.
In many homes, yes. Existing radiators can sometimes work well with a heat pump, but it depends on the design of the system, the size of the radiators, heat loss and required flow temperatures. Bromley Energy will check this properly before recommending the best approach.
The cost of heat pump installation depends on your property, system design, hot water cylinder, radiator requirements, pipework and installation complexity. Bromley Energy can provide a heat pump estimate first, followed by a detailed survey and fixed proposal.
Many homeowners may be eligible for the Boiler Upgrade Scheme grant towards an air source heat pump installation. Eligibility depends on the property and current heating system. Bromley Energy can help explain the next steps as part of your heat pump enquiry.
Yes. A proper heat pump survey is important because an ASHP needs to be designed around your home, not guessed. The survey helps check heat loss, radiators, pipework, hot water demand, outdoor unit location and overall suitability.
Yes, some older homes can be suitable for heat pumps, but the design needs to be right. Insulation, radiator sizing, pipework and heat loss all matter. Bromley Energy will assess your home before advising whether an air source heat pump is a good fit.
Yes. A correctly designed air source heat pump can provide central heating and hot water. Most systems include a compatible hot water cylinder, controls and weather compensation to help the system run efficiently.
Yes. Bromley Energy is Heat Geek accredited, which means we focus on proper heat pump design, low flow temperatures, efficient system performance and high-quality installation rather than simply replacing a boiler with a heat pump.
A correctly selected and well-positioned air source heat pump should run quietly in day-to-day use. The noise level depends on the model, location, installation quality and how hard the system has to work. Bromley Energy will consider outdoor unit placement carefully during the survey, helping reduce noise impact for your home and neighbours.
